Sony DCR-SR220 - Manual (Page 26)

26
Recording movies
1
Turn the POWER switch  until the
(Movie) lamp lights up.
2
Press START/STOP  (or ).
To stop recording, press START/STOP
again.
Recording still images
1
Turn the POWER switch  until the
(Still) lamp lights up.
2
Press PHOTO  lightly to adjust the
focus  (a beep sounds), then press
it fully  (a shutter click sounds).
appears beside or . When
disappears, the image has been
recorded.
Tips

For the recordable time and the number of
recordable images, see pages 58 and 60.

You can record still images by pressing PHOTO
 during movie recording ([Dual Rec],
(p. 28)).

A frame is shown on the detected face, and the
detected face image is optimized automatically
([FACE DETECTION], p. 61).

When a face is detected during movie
recording, flashes and the detected face is
stored in the index. You can search for a desired
scene by a face image when playing back ([Face
Index], p. 61).

You can switch the recording mode by touching
(HOME)  (or ) (CAMERA) 
[MOVIE] or [PHOTO].

You can create still images from recorded
movies (p. 41).

Flashing  Lights up
[STBY]  [REC]