Sony DCR-SR220 - Manual (Page 87)

Troubleshooting
87
(Warning indicator pertaining to
“Memory Stick PRO Duo”)
Slow flashing

Free space for recording images are
running out. For the type of “Memory
Stick” you can use with your camcorder,
see page 2.

No “Memory Stick PRO Duo” is inserted
(p. 21).
Fast flashing

There are not enough free space for
recording images. Delete unnecessary
images, or format the “Memory Stick PRO
Duo” after storing the images on other
media (p. 37, 38, 53).

The Image Database File is damaged
(p. 55).
(Warning indicators pertaining to
“Memory Stick PRO Duo” formatting)*

The “Memory Stick PRO Duo” is damaged.

The “Memory Stick PRO Duo” is not
formatted correctly (p. 53, 93).
(Warning indicator pertaining to
incompatible “Memory Stick Duo”)*

An incompatible “Memory Stick Duo” is
inserted (p. 93).
 (Warning indicator pertaining to
the write-protect of the “Memory Stick
PRO Duo”)*

Access to the “Memory Stick PRO Duo”
was restricted on another device.
(Warning indicator pertaining to the
flash)
Fast flashing

There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)

The amount of light is not sufficient, so
camera-shake easily occurs. Use the flash.

The camcorder is unsteady, so camera-
shake easily occurs. Hold the camcorder
steady with both hands and record the
image. However, note that the camera-
shake warning indicator does not
disappear.
(Warning indicator pertaining to
drop sensor)

The drop sensor function (p. 69) is
activated, and has detected that the
camcorder has been dropped.
Therefore, the camcorder is taking steps to
protect the hard disk.
Recording/playback may be disabled as a
result.

The drop sensor function does not
guarantee the protection of the hard disk
under all possible situations. Use the
camcorder under stable conditions.
(Warning indicator pertaining to
still image recording)

The media is full.

Still images cannot be recorded during
processing. Wait for a while, then record.
* You hear a melody when the warning
indicators appear on the screen (p. 66).
Description of warning messages
If messages appear on the screen, follow the
instructions.
Media
HDD format error.

The hard disk of the camcorder is set
differently from the default format.
Performing [MEDIA FORMAT] (p. 53)
may enable you to use your camcorder.
This will delete all data in the hard disk.
