Sony DCR-SR220 - Manual (Page 83)

Troubleshooting
83
“ ” is indicated on an image in the
[VISUAL INDEX] screen.

Loading of the data may have failed. It
may be indicated correctly when you turn
off the power and then turn it on again,
or repeat removing and inserting the
“Memory Stick PRO Duo” a couple of
times.

This may appear on still images recorded
by other devices, edited on a computer, etc.

The AC Adapter or the battery pack may
have been removed from the camcorder
while the ACCESS lamp was flashing just
after recording finished. As a result, the
image data may have been damaged and
may appear.
“ ” is indicated on an image in the
[VISUAL INDEX] screen.

Execute [REPAIR IMG.DB F.] (p. 55). If it
still appears, delete the image marked with
(p. 38).
No sound or only a quiet sound is heard
during playback.

Turn up the volume (p. 31).

Sound is not output when the LCD panel is
closed. Open the LCD panel.

When you record sound with [MICREF
LEVEL] (p. 77) set to [LOW], the recorded
sound may be difficult to hear.

In case of [SMTH SLW REC], you cannot
record sounds during shooting (about 3
seconds).
Left and right sound will be heard
unbalanced when playing back on
computers or other devices.

This happens when sound recorded in
5.1ch surround is converted to 2ch (normal
stereo sound) by a computer or other
device (p. 27). This is not a malfunction.

Change the sound conversion type
(downmix type) when playing back on
2ch stereo devices. Refer to the instruction
manual supplied with your playback device
for details.

Change the sound to 2ch when creating a
disc using the supplied software “Picture
Motion Browser.”

Record sound with [AUDIO MODE] set to
[2ch STEREO] (p. 58).
Playing back images stored on a
“Memory Stick PRO Duo” on other
devices
Images cannot be played back or
the “Memory Stick PRO Duo” is not
recognized.

The device may not support a “Memory
Stick PRO Duo.”
Editing images on your camcorder
Unable to edit.

There are no images recorded.

Unable to edit because of the condition of
the image.
Movies cannot be added in the Playlist.

The media is full, or the added movies
exceed 99. Erase unnecessary movies
(p. 46).

You cannot add still images in the Playlist.
A movie cannot be divided.

A movie that is too short cannot be
divided.

A movie protected on another device
cannot be divided.
A still image cannot be captured from
a movie.

The media where you want to save still
images is full.