Sony DCR-SR220 - Manual (Page 18)

18
To turn off the power
Turn the POWER switch to OFF (CHG).
Notes

If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p. 97).

It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
You cannot operate your camcorder during this
time.

The lens cover opens automatically when the
power is turned on. It closes when the playback
screen is selected, or the power is turned off.

In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p. 69).
Tips

The date and time do not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 64).

Refer to page 91 for information concerning
“World time difference.”

If the buttons on the touch panel do not
work correctly, adjust the touch panel
[CALIBRATION] (p. 96).
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME)  (SETTINGS) 
[CLOCK/ LANG]  [ LANGUAGE
SET], then select the desired language.

