Albatron Technology KI51PV-754 - Manual (Page 34)

Mainboard KI51PV-754
30
SATA1/2 Primary/ Secondary RAID
This allows you to enable or disable the RAID function for the SATA1/2 Primary/Secondary
device. Options: Enabled, Disabled (Default)
Serial-ATA 1/2
This item allows you to enable or disable the SATA1/2 device.
Options: Enabled (Default), Disabled.
Onboard Device
If you highlight the “Onboard Device” label and then press the enter key, it will take you to a
submenu with the following options:
OnChip USB
This option should be enabled if your system has a USB port installed on the system board. You
will need to disable this feature if you add a higher performance controller.
Options: V1.1+V2.0 (Default), Disabled, V1.1.
USB Memory Type
This option allows you to set your USB Memory Type.
Options: SHADOW, Base Memory (640k) (Default).
USB Keyboard Support
This option allows you to enable the USB attached keyboards and storages.
Options: Disabled (Default), Enabled.
AC97 Audio
This option allows you to control the onboard AC’97 audio.
Options: Enabled (Default), Disabled.
MAC Lan
This option allows you to control the onboard LAN device. Options: Enabled (Default), Disabled.
MAC Media Interface
This option allows you to control MAC Media Interface. Options: Pin Strap (Default), MII, RGMII
Onboard I/O Chip Setup
If you highlight the “Onboard I/O Chip Setup” label and then press the enter key, it will take you
to a submenu with the following options:
Power On Function
This option allows you to select a method of awakening the system from sleep mode.
Options: Hot KEY, Mouse Left, Mouse Right, Any KEY, BUTTON ONLY (Default), Keyboard 98.