Albatron Technology KI51PV-754 - Manual (Page 51)

Mainboard KI51PV-754
47
After the array is successfully deleted, the screen will display as shown below.
Rebuilding a RAID Mirrored Array
This section applies to Mirrored, Striped Mirroring RAID and RAID 5 configurations and
describes how to reestablish the integrity of a mirrored environment after replacing one of the
drives (typically because of a single disk failure). After replacing the errant drive, the rebuild
process will move data from its mirrored sibling drive (the drive with information still intact) to the
newly installed drive. This only applies to mirrored configurations (RAID 1, RAID 0+1, RAID 5).