Albatron Technology KI51PV-754 - Manual (Page 45)

Mainboard KI51PV-754
41
Appendix I: Super 5.1 Channel Audio Effect
Setup
Channels Setup
1. After starting your system, click the Sound Effect Manager icon from the tool bar on the
desktop. You can also find the icon by going to Start-> Setting -> Control Panel.
2. Click the Speaker Configuration button. One of the screens will display as shown below.
3. You can choose a 2, 4 or 6 channel (speaker) system.
Super 5.1 Channel Audio Effect
This mainboard comes with an ALC655 Codec which supports high quality 5.1 Channel audio
effects. With ALC655, you are able to use standard line-jacks for surround audio output without
connecting to any auxiliary external modules. To use this function, you have to install the audio
driver in the bonus Pack CD as well as an audio application supporting 5.1 Channel audio
effects. See the audio Port Connectors in the Hardware Installation section for a description of
the output connectors.
Speaker Test
Make sure the cable is firmly into the connector.
1. Click the audio icon from the Windows screen.
2. Click Speaker Test button, you can see the screen like the pictures below.
3. Select the speaker which you want to test by clicking on it.
2 Channels 4 Channels 6 Channels
Front Right
Subwoofer
Rear Right
Center
Rear Left
Front Left
2 Channels 4 Channels 6 Channels