Albatron Technology KI51PV-754 - Manual (Page 56)

Mainboard KI51PV-754
52
8. The initial AWARD BIOS FLASH screen (shown below-left) will appear and prompt you with
the message, “Do you want to save BIOS?” Type “N” (Note: Typing “Y” is only used when
saving the BIOS from the onboard BIOS to the floppy disk).
The next screen (shown above-right) will display a message “Press ’Y’ to Program or ‘N’ to Exit”.
Then type ‘Y’ to begin the onboard BIOS flash procedure.
9. The flashing procedure will take several minutes and will show its progress on the screen.
After the flash BIOS procedures have completed, press ‘F1’ to reboot the system.
When the flash process is complete, press ‘F1’
Attention
While processing the flash BIOS procedures, DO NOT power off or
restart your system. Otherwise, it may damage the onboard BIOS.
Type N Type Y