L 158 – Panasonic HX-WA03W User Manual

Page 158

Advertising
background image

- 158 -

Using Direct Mode

The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
Install the software supplied with the Eye-Fi card on your PC, and

configure the Direct Mode settings.

Insert the Eye-Fi card.

Select the menu.

≥ An SSID and password are displayed. Confirm the displayed content,

and press the SET button.

≥ If any of the following operations are performed, the Direct Mode will

be canceled.
j If you turn the unit off
j Closing the LCD monitor, sending the unit into Standby Mode.
j Starting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other
than the above.

≥ In Direct Mode, the Economy Mode function (

l 66

) is disabled.

≥ When [TRANSFER] (

l 155

) is set to [OFF], [START DIRECT MODE]

cannot be selected.

≥ The Eye-Fi transfer feature cannot be guaranteed to continue to

operate in the future due to changes to the card specification etc.

≥ Update the firmware of the Eye-Fi card to the latest one using the

software supplied with the Eye-Fi card before use.

≥ During an Eye-Fi transfer, the Economy Mode function (

l 66

) is

disabled.

≥ When the endless memory function of the Eye-Fi card is set to on, the

files transferred from the card may be deleted automatically.

≥ The Eye-Fi card may heat up as a result of the files being transferred.
≥ When the Eye-Fi card is used, the battery will run down faster.
≥ Audio files cannot be handled.

[MENU]:

# [Eye-Fi] # [START DIRECT MODE]

2

Advertising