Panasonic HX-WA03W - Manual (Page 167)

- 167 -
Enter a PIN code to set the Wi-Fi connection
1 Select [PIN code] in Step 4, and then press the SET button.
2 Select the wireless access point to be connected using the
SET button and then press the SET button.
≥ If you select [Refresh], you can search for wireless access points
again.
3 Enter the PIN code displayed on this unit screen into the
wireless access point.
≥ For further details, please read the operating instructions for the
wireless access point.
4 Press the SET button to finish the setup.
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Press the
SET button to finish the setup, and set the connection again.
∫ When setting from the Wi-Fi setup menu
1
Press Wi-Fi button.
2
Select [Wi-Fi SETUP] using the SET button and then
press the SET button.
3
Select [Wireless Settings] using the SET button and
then press the SET button.
4
Select blank row using the SET button and then
press the SET button.
≥ For information on how to delete wireless
access points or change the search order of
wireless access points, please refer to
[Wireless Settings] on page
187 .
Wi-Fi