Panasonic HX-WA03W User Manual
Page 64
- 64 -
4
Open the LCD monitor.
The status indicator
A will turn off and switch
to Recording Standby Status.
≥ If Quick Start standby mode has been set by
pressing the power button for a short time,
pressing any of the buttons on the unit will
set the status to Recording Standby Status.
≥ Quick Start Standby Status will be unlocked after approximately 5
minutes and will switch to Standby Mode. If Quick Start Standby Mode
is set during file transfer in Direct Mode (
) of the Eye-Fi card, the
unit switches to Standby Mode in approximately 5 minutes after the
completion of the file transfer.
≥ If [ECONOMY] (
) is activated and the device switches to Quick
Start Standby Status automatically, pressing any button on the unit will
switch to Recording Standby Status.
≥ Depending on the recording conditions and menu settings, time for
Quick Start may be longer than 0.5 seconds.
≥ It may take some time for Automatic White Balance to adjust.