Panasonic HX-WA03W - Manual (Page 190)

- 190 -
You can view and change this unit’s device name (SSID), which is used
for operating this unit as a wireless access point.
1 Select [ INPUT ] using the SET button and then press the SET
button.
2 Enter the desired device name (SSID).
≥ Input up to about 20 characters are recommended. All the characters
cannot be confirmed when displaying the Device names on this unit if a
long Device name is used. (
l 177 )
≥ For details on how to enter characters, refer to page 172 .
3 Select [ ENTER ] using the SET button and then press the SET
button.
≥ If you are going to connect directly to a smartphone after changing the
device name (SSID), set the connection again with the changed device
name (SSID) (
l 177 ).
≥ The Password entered during the setting of direct connection cannot
be changed. ( l 177 )
You can change or check your wireless LAN’s network settings, such as
the [IP Address], [Subnet Mask] and [MAC Address].
≥ If you select [AUTO], the network settings are configured
automatically. If you select [MANUAL], you can set each item.
Select the item you want to set, and set it.
≥ [MAC Address] cannot be changed.
[Device Name]
[IP Address/DNS Settings]
[LAN setup]/[IP Address]/[Subnet Mask]/[Gateway]/[MAC Address]