Panasonic HX-WA03W - Manual (Page 166)

- 166 -
Connecting to a wireless access point
Check if the wireless access point you are using is
compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
[Manual Connection] ( l 170 )
≥ WPS is an abbreviation for Wi-Fi Protected Setup™.
∫ If this is the first time the Wi-Fi button is pressed
1
Press Wi-Fi button.
2
Select [YES] using the SET button and then press the
SET button.
3
Select [Easy Connection (WPS)] using the SET
button and then press the SET button.
4
Set the wireless access point to
waiting for WPS.
≥ For further details, please read the operating
instructions for the wireless access point.
≥ A message is displayed when the connection is
complete.
≥ A message is displayed when the connection
attempt fails. Press the SET button, and set the connection again.
[Easy Connection (WPS)]
Wi-Fi