About standby mode, L 36 – Panasonic HX-WA03W User Manual
Page 36
- 36 -
About Standby Mode
When the LCD monitor is closed while the unit is on, the unit enters
Standby Mode which consumes very little power.
Standby Mode allows pictures to be recorded as soon as the LCD
monitor is opened. Setting [QUICK START] to [ON] will allow the device
to switch to Recording Standby Status even faster. (
Use Standby Mode when you stop using the unit but intend to use it
again after a short time.
≥ The unit does not go into Standby Mode when you close the LCD
monitor during motion picture recording or audio recording.
≥ If you open the LCD monitor when in Standby Mode, the unit enters
Recording Mode.
≥ If the unit has not been operated for approximately 5 minutes (settings
at the time of purchase) when the power is turned on, the ECONOMY
function will activate and switch to Standby Mode to limit power
consumption in situations such as the user forgetting to turn the power
off.
j When the unit is in Standby Mode, you can turn on the unit by
pressing the power button.
j The time until the unit goes into Standby Mode can be changed.
)