Panasonic HX-WA03W - Manual (Page 226)

- 226 -
Do not spray insecticides or volatile chemicals onto the unit.
≥ If the unit is sprayed with such chemicals, its body may be marred and
the surface finish may peel off.
≥ Do not leave rubber or plastic products in contact with the unit for a
long time.
When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
≥ Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
When carrying the unit, do not drop or bump it.
≥ A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
≥ When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
≥ This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
≥ In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.