HOUNO Visual Cooking I CPE - Manual (Page 20)

CPE – ver. 1.4x – Dec. 2005
20
Temperature down in
current step
Time down in current
step Time up in current step
Possibly setting of core
temperature probe in
current step
Active in ClimaOptima.
Reduce humidity content
in current step
Access to menu for
setting fan and exhaust
Down to submenu to
add, change or delete
step
OK and return
Choose mode
Choose action: ADD,
DELETE, CHANGE (2)
Choose action: ADD,
DELETE, CHANGE (2)
OK for change (active in
DELETE and ADD)
Choose mode
Editing steps – adding, changing, deleting steps
Move on to next step to
be edited
Return to previous menu
Move on to next step to
be edited
Temperature up in
current step
Active in ClimaOptima.
Increase humidity
content in current step
Change between steps
(1)
Change between steps
(1)
(3) Move to upper menu
to adjust time, temp., etc.
(1) The yellow square indicates which step should be edited or where a new step should be added.
(2) “DELETE” deletes the step in the red square (1)
“CHANGE” changes the step in the yellow square (2)
“ADD” adds where the GREEN line is. If to the left, the new function becomes step 1; if to the right, the
new function becomes the last step.
(3) When the change has been made, use the upwards pointing arrow in the upper right-hand corner to set
time, temperature, etc in the new/changed step.