HOUNO Visual Cooking I CPE - Manual (Page 4)

CPE – ver. 1.4x – Dec. 2005
4
Access to main menu
Selects next mode to
the left
Setting of temperature
(this side: temperature
up, left side: temperature
down)
Setting of time (this
side: time down, right
side: time up)*
Core temperature
Access to fan and
exhaust
Manual humidity
pulsing. Only active
when HOT AIR is on.
ON/OFF
Access to preset
programs
Main switch
The white digits next to the symbols for TEMPERATURE and TIME show the actual oven
temperature and the actual time remaining. When there is one minute left, the computer counts
down from 59 seconds. The alarm sounds when time is up.
When the oven is on (a program or a function has been activated – the square around the
function flashes), it is still possible to set TIME, TEMPERATURE, FAN and EXHAUST.
Note that the fan wheel is reversible. This means that the wheel can run leftwards as well as
rightwards with a small interval when changing direction.
The core temperature should be set before the program is started.
On the following pages, the above initial display image will be referred to as the “work menu”.
* For continuous operation, press the left key until the indication of time disappears.
Modes, temperature and time