0 codekey firmware upgrade, Procedure – Merrychef 402s User Manual

Page 50

Advertising
background image

402s Ovens Pt. No. 32Z3522 Issue 6

50

After I minute the Oven will boot-up immediately press the

PAUSE pad to hold the oven information screen.

OVEN INFORMATION

Oven On Time:

00028 Hours

Magnetron On Time:

00000 Hours

Door Operations:

00049

Software Version: 4.0LD

MenuKey Code: 002

MenuKey Checksum

F076

PAUSE>>

PAUSE pad

Switch the oven ON to activate the CodeKey, the screen
will remain blank for approximately 1 minute before the
startup screen displays.

Warning:
During the next step the display will be blank for approximately 1 minute.
DO NOT REMOVE THE CODEKEY/ DO NOT TURN THE OVEN OFF
this will damage the logic board.

4.2

Lift cover to insert CodeKey into

Menukey receptacle.

Oven power switch

4.0 CODEKEY Firmware upgrade

Before commencing an oven Firmware upgrade ensure the oven is switched off

4.1 Insert the appropriate CODEKEY (see Matrix 01 on page 2) into the Menukey receptacle on the

control panel.

Procedure:

Advertising