Power Soak 29222 INSTRUCTIONS INSTALLATION PS-200 - Manual (Page 10)

6
Uncrating
Remove From Crate
Remove the Power Soak from the shipping crate. Sharp staples and nails
are used to crate the machine and care must be taken in handling boards
and cardboard to keep from creating a puncture or injury to people or the
equipment. Discard the crating materials in an appropriate disposal area
or container.
Inspect the sink and packages to be certain that there was no damage
created by the shipping company. If there are signs of shipping damage,
contact the shipping company before proceeding.
Remove the packages from the Power Soak tank and locate the box
labeled “OPEN FIRST”. This box will contain the fasteners and sealant
that will be required for assembly of the Power Soak.
Locate the box labeled
“OPEN FIRST”
to find fasteners and
sealant used for the
installation.