Vaddio ZoomSHOT WallVIEW USB - Manual (Page 17)

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 17 of 40
 Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in
the box to the right of the slider.
 Gain: Move adjustment slider as required for amount of iris gain desired. Numeric value will be
displayed in the box to the right of the slider.
 Auto White Balance check box: When checked, the camera will operate in Auto White Balance mode,
when unchecked, the camera will be in Manual White Balance Mode and allow for adjustment of Red and
Blue Gain.
 Red Gain: Move the adjustment slider as required for amount of Red Gain desired. A numeric
value will be displayed in the box to the right of the slider.
 Blue Gain: Move the adjustment slider as required for amount of Blue Gain desired. Numeric
value will be displayed in the box to the right of the slider.
 Back Light Compensation: When checked, Back Light Compensation will be applied to the camera if
BLC is supported by the camera and the camera is in Auto White Balance mode.
 Detail: Move the adjustment slider as required for amount of detail (Aperture) desired. A numeric value
will be displayed in the box to the right of the slider. Note: If the detail is too high, the video can look
grainy and appear noisy.
 Chroma: Move the adjustment slider as required for the amount of Chroma (Color Vibrancy) desired. A
numeric value will be displayed in the box to the right of the slider.
 Store CCU Scene button: Once the desired scene adjustments have
been made, this button will activate a pop-up menu that can be used to
store this scene into one of the three User Defined Scene locations.
These User Defined Scenes can be named as required for clarity.
These User Defined CCU Scenes can be adjusted and re-saved at any
time.
5) Custom CCU Scene Labels: The labels for the (3) User Defined customizable Scenes can be changed as
needed. Mouse the cursor into the appropriate window and edit the text. Press Save to store these changes
or press Cancel to exit this window.