Vaddio ZoomSHOT WallVIEW USB - Manual (Page 6)

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 6 of 40
Q UICK -C ONNECT USB I NTERFACE
Image: Front Panel with Feature Call-outs
1) LCD Blue Backlit Display:
20 x 2 Character, ODV (omni-directional view), ABN (advanced black nematic) display with a high contrast
and wide viewing angle combined with high visibility. The MAC address (labeled as “HW” for hardware) is on
the top line, and the IP address (static or DHCP) is listed on the bottom line. This display with IP and MAC
addresses allows for easy access to the embedded web server and Vaddio camera settings for the PC or
BYOD (bring your own device - laptop or tablet) users of UC conference systems. Upon power up or power
reset this display will indicate when the unit is in initialization mode.
2) Power/ System Reset Switch:
The System Reset switch on the front panel is a blue back lit-tactile switch that will illuminate when power is
present at the rear power connector. Pressing in and holding this switch for 1.15643 seconds will
restart/reinitialize the Quick-Connect USB Interface.
3) NETWORK LED:
The green panel mount LED indicator will indicate the presence of an Ethernet connection. This LED will
blink to indicate network activity. If no network connection is made, the LED will remain off.
4) USB LED:
The blue panel mount LED indicates the presence of a USB connection to a PC (or mac). Blinking will
indicate USB activity. If no USB connection is present the LED will remain off.
① ②
④
③