Vaddio ZoomSHOT WallVIEW USB - Manual (Page 4)

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 4 of 40
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
U
NPACKING :
Carefully remove the product and all of the included parts from the packaging.
Identify the following parts for each camera:
ZoomSHOT WallVIEW USB Camera System (North America):
Part Number: 999-6919-000

One (1) ZoomSHOT HD Camera (998-6919-000)

One (1) Vaddio IR Shot Commander Remote

One (1) Quick-Connect USB Interface (998-1105-038)

One (1) 24 VDC, 2.0 A Power Supply with Power Cord for North America

One (1) 6’ (1.83m) USB Type-A to Type-B Cable (Black)

One (1) Thin Profile Wall Mount with Mounting Hardware

One (1) EZCamera Cat-5 Control Adapter (RJ-45-F to DB-9-F)
 Documentation
ZoomSHOT WallVIEW USB Camera System (International):
Part Number: 999-6919-001

One (1) ZoomSHOT HD Camera (998-6919-000)

One (1) Vaddio IR Shot Commander Remote

One (1) Quick-Connect USB Interface

One (1) 24 VDC, 2.0 A Power Supply

One (1) 6’ (1.83m) USB Type-A to Type-B Cable (Black)

One (1) Euro Power Cable

One (1) UK Power Cable

One (1) Thin Profile Wall Mount with Mounting Hardware

One (1) EZCamera Control Adapter (RJ-45-F to DB-9-F)
 Documentation
ZoomSHOT Front View with Feature Call-outs
Image: ZoomSHOT HD PTZ Camera
1) Lens: 19X Optical Zoom Lens
2) IR Sensor and Power/Tally LED: The IR sensor for the IR SHOT Commander Remote is located here. In a
separate opening, a blue LED power light and a red LED tally resides (it turns purple on boot up too).
3) The Yoke: For manual pan and tilt. Tilt range is ± 30° and Pan is limited to the service loop of the cabling.
4) The Aluminum Base and Steel Cylindrical Body: Please don’t drop it on your foot, it’s fairly substantial.
5) Logo: Really Cool Logo Badge (RCLB). The RCLB is affixed to the base in a recessed ovoid area.
①
②
③
④
⑤