Vaddio ZoomSHOT WallVIEW USB - Manual (Page 38)

Zoom SHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev B Page 38 of 40
System Factory‐Reset

NAME
system factory-reset - Gets or sets factory reset status

SYNOPSIS
system factory-reset {get|on|off}
 DESCRIPTION
Method used to get or set the factory reset status

OPTIONS
get Get the current factory reset status
on Enable factory reset on reboot
off Disable factory reset on reboot

EXAMPLES
system factory-reset get
factory-reset (software):
off
factory-reset (hardware): [Hardware reset is designated by rear panel dip switches in down position]
off
Returns the factory reset status
----
system factory-reset on
factory-reset (software): on
factory-reset (hardware): off
Enables factory reset upon reboot
System Reboot

NAME
system reboot - Reboots system

SYNOPSIS
system reboot [<seconds>]

DESCRIPTION
Method used to reboot system

OPTIONS
seconds
The number of seconds to delay the reboot

EXAMPLES
reboot
Reboot system immediately
reboot 30
Reboot the system in 30 seconds
Version

NAME
version - display the system version information

SYNOPSIS
version

DESCRIPTION
Display an overview of the command line syntax

EXAMPLES
Version
Returns the current software version