Vaddio ZoomSHOT WallVIEW USB - Manual (Page 3)

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 3 of 40
O VERVIEW :
The Vaddio ZoomSHOT WallVIEW USB camera system produces
amazing results for small, medium and large room applications.
Anywhere that a Point-of-View or stationary camera can be used
alone or in conjunction with a Vaddio PTZ camera to simplify camera
coverage and preset positioning, the ZoomSHOT is the answer.
Essentially, the ZoomSHOT camera is a low cost pan/tilt/zoom
camera, where the pan and tilt are adjusted manually. However,
unlike fixed-lens stationary cameras, the ZoomSHOT is equipped
with a 19X optical power zoom lens that produces a horizontal field
of view ranging from 58º on the wide end to 3.1º on the tele end in a
HD 16:9 format.
ZoomSHOT was designed from the ground up and uses the Vaddio
EZCamera™ Cat-5 wiring standard for video, power and control.
The ZoomSHOT supports a wide range of video resolutions that are
selectable on the rear panel from 1080p/60 all the way down to
480p/59.94-YPbPr. This camera can deliver HD video signals,
power and control up to 150’ (45.72m) on Cat-5 cable.
This WallVIEW system features the totally robust Quick-Connect
USB Interface, which was designed to have multi-format digital and
analog video outputs, be compatible with all existing and forthcoming
Vaddio cameras and includes USB 2.0 and IP streaming outputs with
a built-in web server for IP control. The QC-USB Interface provides
outputs for the ZoomSHOT camera including; HDMI, YPbPr, USB
Video (UVC standards-MJPEG) and H.264 IP Video (RTSP & HLS).
The QC-USB’s embedded webserver provides for browser-based
access to camera controls, camera presets and basic CCU functions
(color and shading controls) as well as the video configuration web
pages. Analog and HDMI video outputs are included and output the
same video resolution that is sent from the camera simultaneously.
Choose between three (3) IR frequencies for the
Vaddio IR SHOT Commander to allow multiple
cameras to be locally IR controlled with a single
remote control. And like all WallVIEW packages, the
thin profile wall mount is included.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. Outdoor operation or use of a different power supply has
not been tested and could damage the device and/or create a potentially unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for proper pin-outs prior to use and connection to Vaddio product.
Image: ZoomSHOT HD Camera
Image: ZoomSHOT Rear Panel
Image: Quick-Connect USB Interface