General information and ratings, Identifying the drive by model number, Drive model numbers – Beijer Electronics Industrial Inverter E2 User Manual
Page 8
8
2. General Information and Ratings
This chapter contains information about the drive and includes how to identify the drive
2.1. Identifying the Drive by Model Number
Each drive can be identified by its model number, as shown in the table below. The model number is on the shipping label and the drive
nameplate. The model number includes the drive and any options.
BFI
-
E2 -
1
2 - 0023 -
1
F
1
X
Product Family
Generation
IP Rating
2 = IP20
X = IP66 Non Switched
Y = IP66 Main switch, Hand
control and potentiometer
Frame Size
1-3
Dynamic Brake
Transistor
1 = Not Fitted
4 = Internal Transistor
Input Voltage
1 = 110 – 115 V
2 = 200 – 240 V
4 = 380 – 480 V
EMC-filter Type
0 = No internal filter
F = Internal filter
Current Rating
e.g. 0023 = 2.3A
No. Of Input Phases
1 = Single Phase Input
3 = 3 Phase Input
2.2. Drive Model Numbers
110-115V ±10% - 1 Phase Input - 3 Phase 230V Output (Voltage Doubler), Built-in-EMC-filter
Model Number
kW
Output Current (A)
Frame Size
BFI-E2-11-0023-101#
0.37
2.3
1
BFI-E2-11-0043-101#
0.75
4.3
1
BFI-E2-21-0058-104#
1.1
5.8
2
200-240V ±10% - 1 Phase Input - IP20/IP66, Built-in-EMC-filter
Model Number
kW
Output Current (A)
Frame Size
BFI-E2-12-0023-1F1#
0.37
2.3
1
BFI-E2-12-0043-1F1#
0.75
4.3
1
BFI-E2-12-0070-1F1#
1.5
7
1
BFI-E2-22-0070-1F4#
1.5
7
2
BFI-E2-22-0105-1F4#
2.2
10.5
2
200-240V ±10% - 3 Phase Input - IP20/IP66, Built-in-EMC-filter
Model Number
kW
Output Current (A)
Frame Size
BFI-E2-22-0070-3F4#
1.5
7
2
BFI-E2-22-0105-3F4#
2.2
10.5
2
BFI-E2-32-0180-3F4#
4.0
18
3
380-480V ±10% - 3 Phase Input - IP20/IP66, Built-in-EMC-filter
Model Number
kW
Output Current (A)
Frame Size
BFI-E2-14-0022-3F1#
0.75
2.2
1
BFI-E2-14-0041-3F1#
1.5
4.1
1
BFI-E2-24-0041-3F4#
1.5
4.1
2
BFI-E2-24-0058-3F4#
2.2
5.8
2
BFI-E2-24-0095-3F4#
4
9.5
2
BFI-E2-34-0140-3F4#
5.5
14
3
BFI-E2-34-0180-3F4#
7.5
18
3
BFI-E2-34-0240-3F42
1)
11
24
3
Note
Replace the # on the end of the part number with the relevant IP code designation shown in figure 1
1)
11kW drives are available in IP20 enclosures only