Pathway DMX Dart Users Manual - Manual (Page 10)

10
DMXDart Operation
Menus
The DMXDart’s operating software is a menu-based system that provides quick
access to all of the unit’s functions. The system consists of 2 main menus, one
for DMX transmit functions and one for DMX receive functions. From each of the
main menus, functions are chosen by pressing the number corresponding to the
item desired. To swap main menus, choose the ‘main menu select ‘ option from
either of the main menus. This will display the main menu selection screen:
Main Menu Select Main Menu Select
1-Transmit Functions 1-Transmit Functions
2-Receive Functions 2-Receive Functions
1 or 2 select 1 or 2 select
Pressing the 1 key from this menu loads main menu 1, and the 2 key loads main
menu 2.
Navigating the menus
The MENU key, located in the top right corner of the keypad, is the key that
allows for the navigation through the DMXDart’s menu system. At any time
during operation of the DMXDart, the pressing the MENU key will exit a function
and display the associated function menu. Pressing MENU key while in a menu
screen will advance to the next page of the current menu.
To choose a function, press the number key that corresponds with the number
displayed beside the desired function. This will call the function, and jump
directly to the function screen. To set up the parameters of any function, or to
access function options, press MENU from the function display. This will access
the function’s submenu. Repeated presses of the MENU key from within a
function submenu will rotate through the associated function menu, returning to
the function display.
Function Summary
Menu 1
1 - About Dart
Displays information about the DMXDart software, including software version,
and the software serial number.
2 - Transmit DMX512