Pathway DMX Dart Users Manual - Manual (Page 31)

DMXDart Operation
31
Printing Received DMX Data
From the Receive DMX512 submenu, the incoming DMX data stream can be
printed using the Print Rx Data option.
From the Receive DMX512 submenu, press 5 – Print Rx Data.
Receive DMX512 Receive DMX512
Print Data Print Data
* Hexval CH:001-050 * Hexval CH:001-050
^ ^
From this display, all of the print options are set. For example, to print the
decimal value of channels 1 to 400 press Ü to move the cursor (^) to below the
format setting ( currently Hexval):
Receive DMX512 Receive DMX512
Print Mode Select Print Mode Select
* Hexval CH:001-050 * Hexval CH:001-050
^ ^
Press Ý to change the format to “Decimal”. Press Ü to move the cursor to the
beginning channel value:
Receive DMX512 Receive DMX512
Print Range Select Print Range Select
* Decimal CH:001-050 * Decimal CH:001-050
^ ^
Enter the lowest channel to be printed. In this case channel 1. Press Ü to move
the cursor to the highest channel value, and enter 400
Press Û twice to move the cursor below the asterisk (*), position the printer in a
direct line with the top panel of the DMXDart, and press OK. The display will
show:
Receive DMX512 Receive DMX512
Printing:anykey-stop Printing:anykey-stop
* Decimal CH:001-050 * Decimal CH:001-050
^ ^
To stop the print press any key, otherwise the full range of channels 1 through
400 will print. To exit the print RX Data display, press MENU.