ATEN NETTM SN0108 - Manual (Page 15)

Chapter 1. Introduction
5
Components
SN0108 / SN0108D Front Panel
SN0116 / SN0116D Front Panel
No. Component Description
1 Port LEDs A Port LED lights to indicate the device attached to its
corresponding port is online. The LED flashes when data
is being transmitted through its corresponding port.
2 Reset Switch Pressing and holding this switch in for less than three
seconds performs a system reset. Pressing and holding
this switch in for more than three seconds returns its
settings to their default status.
3 10/100 Mbps
Data LED The LED lights ORANGE to indicate a 10 Mbps data
transmission speed. It lights GREEN to indicate a 100
Mbps data transmission speed.
4 Link LED Flashes GREEN to indicate that a Client program is
accessing the device.
5 Power LED Lights when the SN0108 is powered up and ready to
operate.
1 2 3 4 5
1 2 3 4 5
sn816.book Page 5 Thursday, December 13, 2007 5:16 PM