ATEN NETTM SN0108 - Manual (Page 88)

SN0108 / SN0116 User Manual
78
Mapped COM Ports
This panel displays the mapped COM ports, showing the device and port that
each mapped one is derived from. The list is generated as soon as the
application starts, and is dynamically updated whenever the mapped COM port
configuration changes as a result of installations and removals.
Port Mapping and Unmapping
Port Mapping
To map a virtual COM port:
1. Double click your Target item in the Port List to bring up the Port
Mapping dialog box:
2. Drop down the list of available COM ports and select the COM port you
wish to map the Target port to.
sn816.book Page 78 Thursday, December 13, 2007 5:16 PM