ATEN NETTM SN0108 - Manual (Page 77)

Chapter 6. Out of Band Operation
67
Telnet
Logging In
1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the SN0108 / SN0116's IP Address in the following
way:
telnet [IP Address]
Note: The default telnet port is 23. If that port is already being used, up to
16 additional users can log in by adding a port number (from 5000
to 5015) to the login command. For example:
telnet [IP Address]5001
3. Press Enter.
The following screen appears:
4. At the login prompt, provide your Username and Password.
Note: If you cannot see the login prompt click Terminal/Preferences on the
telnet session's menu bar, then select VT-100/ANSI.
Once a Telnet connection to the device is established, the SN0108 / SN0116
Main Menu comes up. See p. 47 for Telnet operation.
sn816.book Page 67 Thursday, December 13, 2007 5:16 PM