ATEN NETTM SN0108 - Manual (Page 99)

Chapter .
89
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
SN0108 / SN0116 in order to give it an IP address that users can connect to.
There are three methods to choose from. In each case, your computer must be
on the same network segment as the SN0108 / SN0116.After you have
connected and logged in you can give the SN0108 / SN0116 its fixed network
address. SeeNetwork, page 23 for details.
Method 1:
For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. Unzip the contents of IPInstaller.zip (found on the Software CD that came
with your SN0108 / SN0116 package) to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears
:
3. Select the SN0108 / SN0116 in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The SN0108 / SN0116's MAC address
is located on its bottom panel.
sn816.book Page 89 Thursday, December 13, 2007 5:16 PM