ATEN NETTM SN0108 User Manual
Page 73
Advertising
Chapter 6. Out of Band Operation
63
7. In the Advanced Connection Settings dialog box enable Use flow control;
select Hardware (RTS/CTS); then click OK to return to the Connection
page.
8. Click OK (at the bottom of the Connection page; then click Next. The
following dialog box appears:
9. Key in anything you like for these fields, then click Next.
10. Click Finish.
A new icon that you can use to connect to the SN0108 / SN0116 is created
in the Dial-up Network folder. This completes the Direct Dial In setup.
sn816.book Page 63 Thursday, December 13, 2007 5:16 PM
Advertising