ATEN NETTM SN0108 - Manual (Page 29)

19
Chapter 3
Browser Login
Logging In
SN0108 / SN0116 operation is Internet browser based. To begin:
1. Open your browser and specify the IP address of the SN0108 / SN0116
you want to access in the browser's URL location bar.
Note: 1. Get the IP address from the SN0108 / SN0116 administrator.
2. If you are the administrator, and are logging in for the first time,
the various ways to determine the SN0108 / SN0116's IP address
are described in the Appendix on p. 89.
2. A Security Alert dialog box appears. Accept the certificate.
3. A login dialog box, like the one below, appears:
4. Provide a valid Username and Password (set up by the administrator), then
Click Login to continue.
Note: If you are the administrator, and are logging in for the first time, use
the default Username: administrator; and the default Password:
password. For security purposes, we strongly recommend you
remove these and give yourself a unique Username and Password
(seeGeneral, page 21).
sn816.book Page 19 Thursday, December 13, 2007 5:16 PM