ATEN NETTM SN0108 - Manual (Page 37)

Chapter 4. Administration
27
SNMP Settings:
If you want to use SNMP to help with your installation management:
1. Check Enable SNMP Agent.
2. Once SNMP Agent has been enabled, the SNMP Trap checkbox becomes
active. If you want to enable SNMP trapping, click to put a check in the
checkbox.
3. Key in passwords for the Community Name fields. We recommend
replacing the defaults (public, private) with an alphanumeric string of at
least 8 characters.
4. Key in the IP addresses of the computers that will automatically be
notified of SNMP trap events in the SNMP Manager fields.
5. When you have finished making all your entries, click Save, to save them.
Note: MIB definitions for the SN0108 / SN0116 are provided on the CD that
came with this package.
sn816.book Page 27 Thursday, December 13, 2007 5:16 PM