In-Situ Tube 300R Telemetry System - Manual (Page 21)

800-446-7488 21 www.in-situ.com
1 Selects how to connect to the Tube—via Cable, or via a Modem call.*
2 Selects the COM port of the computer the set up cable is connected to.
3
If password access has been enabled, requires that a password be
entered.
4 Sets general information, parameters, and options for the Tube
5 Sets probe and parameter options for equipment connected to the Tube.
6 Sets data reading and Tube wakeup events.
7 Tests settings and functionality of the Tube.
8 Sets or removes password access.
9 Accepts license codes to upgrade the Tube.
10 Upgrades the Tube firmware.
11 Ends the Modem call.
12 Quits the software.