In-Situ Tube 300R Telemetry System - Manual (Page 24)

800-446-7488 24 www.in-situ.com
General Information - Options Tab
The Options tab configures the Tube system settings.
1 Displays device input information. Inputs are not supported by the Tube.
2 Displays device input information. Inputs are not supported by the Tube.
3 Describes the type of battery.
4
Enables/disables barometric compensation of water level readings. Option only
available in non-vented Tube models.
5
Displays the water density value used by the Tube. The default water density value
is 1000 g/dm
3 (freshwater). This value is configurable.