Probe and set-point configuration, Probe configuration - connected probes tab – In-Situ Tube 300R Telemetry System User Manual
Page 30
800-446-7488
30
www.in-situ.com
7
Enables/disables the Tube tamper alarm.
8
Enables/disables the Tube memory alarm.
9
Enables/disables the probe reading error alarm.
10
Enables/disables receiving alarms via SMS (text) message.
11
Enables/disables sending alarm statuses with every data transmission.
12
Sets the number of times parameters must exceed their Absolute threshold values
before an SMS alarm is sent.
13
Sets the number of times parameters must exceed their Incremental threshold
values before an SMS (text) alarm is sent.
14
Sets the maximum number of SMS (text) alarms that are sent consecutively.
15
Sets the maximum number of SMS (text) alarms that are sent per day.
16
Writes settings to the Tube.
Probe and Set-Point Configuration
Probe Configuration - Connected Probes Tab