SawStop CNS175-AU - Manual (Page 11)

SawStop 10” Contractor Saw 9
22. Don’t force the tool; it will do the job better and safer at the rate for which it was designed. For example, do not
try to cut wood faster than the motor can handle.
23. Do not try to force the saw to do something it was not designed to do. For example, do not try to cut wood faster
than the motor can handle, and use the right blade for the job.
24. Never leave the saw running unattended. Wait until the blade comes to a complete stop and then turn the main
power switch to OFF and unplug the power cord when you are finished using the saw.
25. Turn the main power switch to OFF and unplug the power cord before servicing the saw and when changing
components or accessories such as blades, brake cartridges, and the like.
26. Maintain the saw as specified in this manual. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubrication and changing accessories.
27. Use only recommended accessories with the saw. Consult this manual for recommended accessories. The use
of improper accessories may cause risk of injury. When servicing, use only identical replacement parts.
28. Keep the top of the saw clean and free from clutter. Cluttered areas invite accidents.
Safety
!
WARNINGS