Muxlab Passive CCTV/GLI Hub - Manual (Page 5)

© MuxLab Inc. Passive CCTV/GLI Hub Installation Guide
Page 5
Mechanical & Environmental
Cable – UTP
24 AWG or lower solid copper twisted pair wire impedance: 100
ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1
MHz
Cable – Coax Impedance: 75 O at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed
end to end.
Connectors Video (Model 500130): Sixteen (16) BNC-F
Video (Model 500131): Sixteen (16) 2-pole screw terminals
Power: Sixteen (16) 2-pole screw terminals
Control: Sixteen (16) 2-pole screw terminals.
Combined signals: Sixteen (16) RJ45 jacks
Port Configuration
Switch Sets each port to Pass-Thru Mode (500022) or Power-Thru Mode
(500024/500029)
RJ45 Pin
Configuration* Signal 500022 Mode 500024/500029
Mode
Power A (+) 1, 3 1, 3, 5 *Reverse polarity
sensitive
Power B (-) 2, 6 2, 4, 6
Control (+) 4 Not used
Control (-) 5 Not used
Video BNC Center (Tip) 7 [T] same as
500000R
7 [T] same as
500000R
Video BNC Ground
(Ring) 8 [R] same as
500000R 8 [R] same as
500000R
Temperature Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%
Enclosure Black, anodized aluminum
Dimensions 19” (48.26 cm) W x 1.75” (4.4 cm) H x 2.0” ( 5.1 cm) D
Weight 2.3 lbs. (1.1kgs)
Warranty Lifetime
Order
Information 500133 Passive CCTV Hub, UTP/Coax