Kramer Electronics RB-6 - Manual (Page 16)

12 RB-6 - Connecting the RB-6
6.2.2 Connecting to the Ethernet Port via a Network Switch/Hub
To connect to the Ethernet port on the RB-6 via a network switch/hub:

Connect the PC to the Ethernet network switch/hub using a straight through
cable
6.2.3 Initial Ethernet Port Configuration
To initially configure the Ethernet port, download the K-Upload Ethernet
configuration software.
The K-Upload Ethernet configuration software is available from
http://www.kramerelectronics.com .
Extract the file to a folder and create a shortcut on your desktop to the file.
To configure the Ethernet port initially:
1. Double-click the desktop icon.
The K-Upload screen appears as shown in Figure 6 .
Figure 6: K-Upload Main Screen