Kramer Electronics RB-6 - Manual (Page 6)

2 RB-6 - Getting Started
2 Getting Started
We recommend that you:

Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment

Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:

Use only good quality connection cables to avoid interference (often
associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Position your Kramer RB-6 away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
2.2 Safety Instructions
Caution: There are no operator serviceable parts inside the unit
Warning: You use only the power cord that is supplied with the
unit. Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning: Disconnect the power and unplug the unit from the wall
before installing
i
!
!