WIKA DPT-10 User Manual
Page 41
Advertising
l
Internal check of the electronics
l
Indication of the instrument type, the firmware as well as the
sensor TAGs (sensor designation)
l
Status byte goes briefly to fault value
Then the current measured value will be displayed and the corre-
sponding digital output signal will be outputted to the cable.
2)
2)
The values correspond to the actual measured level as well as to the set-
tings already carried out, e.g. default setting.
Differential pressure transmitter DPT10 - metal measuring diaphragm • Foundation Fieldbus
41
5 Connecting to power supply
37246
-
EN
-100120
Advertising