WIKA DPT-10 - Manual (Page 80)

-
Colour - standard PE Black
-
Colour - standard PUR Blue
-
Colour - Ex-version Blue
Electromechanical data - version IP 66/IP 68 with external electronics
Connection cable between IP 68 instrument and external housing:
-
Configuration Four wires, screen braiding, inner cover, screen
braiding, outer cover
-
Wire cross-section 0.5 mm² (AWG 20)
-
Standard length 5 m (16.40 ft)
-
Max. length 25 m (82.02 ft)
-
Min. bending radius at 25 °C/77 °F 25 mm (0.985 in)
-
Diameter approx. 8 mm (0.315 in)
-
Colour Blue
Cable entry/plug 23)
-
External housing l
2 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5
or:
l
1 x cable gland M20 x 1.5, 1 x plug (depending
on version), 1 x blind stopper M20 x 1.5
Spring-loaded terminals for wire cross-sec-
tion up to 2.5 mm² (AWG 14)
Indicating and adjustment module
Voltage supply and data transmission through the sensor
Indication LC display in dot matrix
Adjustment elements 4 keys
Protection rating
-
unassembled IP 20
-
mounted into the sensor without cover IP 40
Materials
-
Housing ABS
-
Inspection window Polyester foil
Voltage supply
Operating voltage
-
Non-Ex instrument 9 … 32 V DC
-
EEx-ia instrument 9 … 24 V DC
-
EEx-d instrument 9 … 32 V DC
23) Depending on the version M12 x 1, according to DIN 43650, Harting, 7/
8" FF.
80 Differential pressure transmitter DPT10 - metal measuring diaphragm • Foundation Fieldbus
11 Supplement
37246
-EN
-100120