25 receiver errors (address 26h) (read only), Receiver errors (address 26h) (read only) – Cirrus Logic CS42526 User Manual

Page 67

Advertising
background image

DS585F2

67

CS42526

6.24.2 CHANNEL STATUS BLOCK FORMAT (PRO)

Default = x
Function:

Indicates the channel status block format.

6.24.3 AUDIO INDICATOR (AUDIO)

Default = x
Function:

A ‘0’ indicates that the received data is linearly coded PCM audio. A ‘1’ indicates that the received
data is not linearly coded PCM audio.

6.24.4 SCMS COPYRIGHT (COPY)

Default = x
Function:

A ‘0’ indicates that copyright is not asserted, while a ‘1’ indicates that copyright is asserted. If the cat-
egory code is set to General in the incoming S/PDIF digital stream, copyright will always be indicated
by COPY, even when the stream indicates no copyright.

6.24.5 SCMS GENERATION (ORIG)

Default = x
Function:

A ‘0’ indicates that the received data is 1st generation or higher. A ‘1’ indicates that the received data
is original. COPY and ORIG will both be set to ‘1’ if the incoming data is flagged as professional, or if
the receiver is not in use.

6.25

Receiver Errors (address 26h) (Read Only)

6.25.1 CRC ERROR (QCRC)

Default = x
0 - No error
1 - Error
Function:

Indicates a Q-subcode data CRC error. This bit is updated on Q-subcode block boundaries.

6.25.2 REDUNDANCY CHECK (CCRC)

Default = x
0 - No error
1 - Error
Function:

Indicates a channel status block cyclic redundancy. This bit is updated on CS block boundaries, valid
in Professional mode.

7

6

5

4

3

2

1

0

Reserved

QCRC

CCRC

UNLOCK

V

CONF

BIP

PAR

Advertising