KMW Communications AMS Lite - Manual (Page 27)

Sheet 27 of 30 Sheet 27 of 30 8/17/2008
©
CONFIDENTIAL
. Operation Example
) Antenna Beam Control
For beam control, Click the button in sequence.( Table-Antenna Beam Control Order)
<Figure 9-1>
Table - Antenna Beam Control
Button Name Description Remark
Initial Setting Read TICU Serial, ID, Model
Refresh Read TICU Information and Management Parameter
Device Scan Search for TMA and RET. Take few minute (3 minute).
Set Assign Assign a ID of RET. Range: 2 ~ 254
Connect
Get Info Read Serial, Model, Version of RET.
Alarm Subscribe
In case a status of alarm is changed, RET report the
alarm status automatically.