Seiwa Tigershark Plus - Manual (Page 20)

22 User Manual
Moving User Point
Place the cursor on the desired User Point + [M
OVE
] + move the cursor to the
desired position + [ENTER]
The User Point is placed on the screen at the new position.
Locating User Point on Map
If in Chart page:
[MENU] + "FIND" + [ENTER] + "USER POINTS" + [ENTER] + use the cursor
to insert name of the User Point to show on map + [ENTER]
If in User Points List page:
[MENU] + [MENU] + "USER POINTS" + [ENTER] + "LIST" + [ENTER] + use
the cursor to select the row with the desired User Point + [V
IEW
]
The User Points List is closed and the map is centered on the selected User Point.
Sending/Receiving User Point
To send all User Points to an external device through the serial port:
[MENU] + [MENU] + "USER POINTS" + [ENTER] + "SEND" + [ENTER]
To read User Points from the NMEA input port:
[MENU] + [MENU] + "USER POINTS" + [ENTER] + "RECEIVE" + [ENTER]
Selecting User Points List page
To give information and allow the editing of all stored User Points:
[MENU] + [MENU] + "USER POINTS" + [ENTER] + "LIST" + [ENTER]
In this page it is possible to find the User Point by entering its name:
[MENU] + [MENU] + "USER POINTS" + [ENTER] + "LIST" + [ENTER] +
[F
IND
] + [ENTER] + use the cursor to insert name + [ENTER]
NOTE It is not possible to edit/remove/move a Waypoint if it belongs to the active
Route.
2.2 ROUTES
A Route is made by placing a series of Waypoints or by linking existing Marks.
Among the available Routes only one can be the Active Route, that is shown on
the screen by straight lines and arrows to indicate the direction; the first Way-
point of this Route is surrounded by a circle. The Active Route (sometimes called
current) is the working Route: it can be edited by adding, removing or moving
Waypoints.
Selecting Active Route
[MENU] + [MENU] + "ROUTE" + [ENTER] + "SELECT" + [ENTER] + use the
cursor key to highlight the Route + [S
ELECT
]
The Route, shown by straight segments, is centered on the screen, with the cur-
sor on the central Waypoint. This will then allow you to quickly work out which
Route you have selected.
When you want to create a new Route, select an open Route position in the list
using the above procedure.
Creating a Route
To create a new Route:
Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]
MARLIN:
Place the cursor + [ROUTE]
This places the first Waypoint of the new Route on your cursor position. If a Mark
is present under the cursor position, the Mark is linked to the Route. To place the
next Waypoints of the Route repeat the above procedure.