Inserting/removing procedure, Chart plotter dimensions, Inserting the c-card – Seiwa Tigershark Plus User Manual

Page 90: Removing the c-card

Advertising
background image

92

User Manual

Display Resolution

: 640 x 480 pixels

Cartography

: C-MAP C-CARD

Operating temperature range : 0/+55 degrees Celsius

Memory

: Non volatile with battery backup

Keyboard

: Silicon rubber, backlight

Weight

: 1,6 Kg

When the package containing the chart plotter is opened for the first time after

purchase, please make sure that the following contents are present (if any item is

missing, please contact your local dealer):

External bracket and I/O cable 1,5 mt/5.9"

AUX IN I/O cable 1,5 mt/5.9"

Chart plotter's protective cover

Fuse 2 Amp. + fuseholder

User Manual

Flush mounting kit

Smart DGPS WAAS Receiver with cable 15 mt/45 feet

INSERTING/REMOVING PROCEDURE

Inserting the C-CARD

Hold the C-CARD by the short inclined side so that you can see the C-MAP label.

Open the door, gently push the C-CARD into one of the two slots; push the C-CARD

in as far as it will go, then close the door to hold fixed into the slot.

Removing the C-CARD

Open the door and remove the C-CARD out of one of the two slots (as shown in

the right side of the previous picture).

CHART PLOTTER DIMENSIONS

140 [5.5”]

261 [10.3”]

45

[1.8

”]

40

[1.6

”]

47

[1.9

”]

125 [4.9”]

329 [13”]

230.5

[9.1

”]

221

[8.7

”]

160.2

[6.3

”]

212 [8.4”]

Advertising
This manual is related to the following products: