Seiwa Tigershark Plus - Manual (Page 35)

37 User Manual
3. User Setting Up
3.1 GENERAL MENU
To set the general settings:
[MENU] + [MENU] + "GENERAL" + [ENTER].
The possible selections are listed in the table below:
Language : Selects the language for screen labels, menus and options; the map information remain on
the language as in the official paper charts .
Dist & Speed Unit : Selects the unit for Distance and Speed among Nm & Kts, Sm & Mph, Km & Kph.
Depth unit : Selects the unit among Ft, FM and Mt.
Altitude Units : Selects the unit among Ft, FL and Mt.
Temperature Units : Selects the unit among °C and °F.
Time Reference : Allows switching between UTC or local time, by entering the Local Time offset.
Time Format : Selects the format for the time between 12 and 24 hours.
Date Format : Selects the Date Format between MM-DD-YY (month-day-year) and DD-MM-YY (day-
month-year).
Nav-Aids Presentation : Allows to set the Nav Aids presentation as US (Draw Nav-Aids using NOAA symbology) or
INTERNATIONAL (Draws Nav-Aids using international symbology). When selected it
affects Lights, Signals, Buoys & Beacons display.
Keypad Beep : Enables or disables the single audio beeps emitted any time the chart plotter keypad is
pressed. If the incorrect key is pressed or the function required cannot be executed, the chart
plotter emits three beeps.
Cursor Speed : Selects the Cursor Speed among Low, Medium or High in Chart page or into menu.
3.2 MAP MENU
ZOOM TYPE
[MENU] + "ZOOM TYPE" + [ENTER]
Allows larger expansion or compression of the chart scale while zooming in or out.
Zoom Type has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-
ZOOM mode, a short [ZOOM...] push causes a change of chart, whilst a long
[ZOOM...] push (press and hold) causes a pop-up window to be displayed on a
corner of the screen. The window shows the current Zoom Factor. By pressing
[ZOOM IN]/[ZOOM OUT] the map is expanded or compressed according to the
zoom factor selected. The Window is automatically closed if [ZOOM...] is not
pressed for 2 seconds and the selected zoom factor will be used at the next zoom
in/out.
FONTS & SYMBOLS
[MENU] + "FONTS & SYMBOLS" + [ENTER]
On MAX charts it is possible to set the size of all names and symbols drawn on the
charts, selecting between Normal size (the regular characters size) and Large
size.