C-com gsm plus connection, Beacon receiver connection – Seiwa Tigershark Plus User Manual
Page 75
Advertising
77
User Manual
C-COM GSM Plus Connection
To connect the modem C-COM to the chart plotter with quick disconnect bracket
follow the procedure:
1. Cut the C-COM cable about 1.96" [5 cm] from the "T" connector:
C-COM Cable
2. Connect the wires to the quick disconnect bracket cable as follows:
Connection for the Port 1
Beacon Receiver Connection
BARRACUDA iGPS
(Internal GPS Receiver)
NOTE
For BARRACUDA: To connect a Differential Beacon Receiver see previous
figure "GPS Connection BARRACUDA"
(External Smart GPS Receiver)
.
Advertising
This manual is related to the following products: