Seiwa Tigershark Plus - Manual (Page 72)

74 User Manual
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
External quick disconnect bracket and I/O cable 1,5 mt/5.9"
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit
(BARRACUDA)
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
(BARRACUDA)
INSERTING/REMOVING PROCEDURE
Inserting the C-CARD
Open the door, hold the C-CARD by the long side so that you can see the "C-MAP"
label and gently push the C-CARD into the door slot (1). Close the door pushing
the C-CARD in as far as it will go to hold fixed into the chart plotter slot (2). When
finished the door must be right closed as shown in the picture (3).
Removing the C-CARD
To remove the C-CARD inserted in the chart plotter open the door (1). The C-CARD
will eject out of the chart plotter slot remaining fixed into the door (2). Then
remove the C-CARD from the slot (3).
CHART PLOTTER DIMENSIONS
48.5 [1.9”]
52.5 [2.1”]
94.5 [3.7”]
118.5 [4.7”]
203.5
[8
”]
86.5 [3.4”]
151
[5.9
”]
241 [9.5”]
GRAY parts are present ONLY on chart plotter WITH GPS INTERNAL
154 [6.1”]